Keep cleanout openings protected and accessible with reliable cover caps and plates. This guide highlights five top options from reputable brands, covering various sizes, materials, and installation needs. Each product is evaluated for durability, ease of use, and compatibility with common cleanout holes found in residential and commercial plumbing, decking, ceilings, and floors. Read on to compare features and choose the right cap or cover for your project.
| Product | Brand | Size / Fit | Notes |
|---|---|---|---|
| XYOCX Replacement 6″ Clean Out Tee Cap | xyocx | 6 inch | Black steel, BM0029, replacement part |
| HEIWUKONG 7Inch Clean Out Cover Plate | HEIWUKONG | 7 inch | Stainless steel; decorative and paintable |
| LASCO 03-5600 Clean-Out Cover 4 1/2-Inch | LASCO | 4.5 inch | ABS white; paintable; UPC approved |
| Wuno Shop 7 Inch Cleanout Cover | Wuno Shop | 7 inch | Stainless steel, decorative ceiling/ floor plate |
| BOPOREAE Expandable Mechanical Seal Cleanout Plug | BOPOREAE | 3-9/16″ to 4-5/16″ | Rubber expansion with stainless handle |
XYOCX Replacement 6″ Clean Out Tee Cap
The XYOCX 6-inch clean out tee cap is made from 28 gauge steel (black finish) and is designed as a replacement part BM0029. It is described as new, unused, unopened, and undamaged. The product serves as a direct replacement cap for cleanout tees, helping to seal openings while allowing easy access for maintenance. Its 6-inch size is suitable for standard residential cleanout connections, and the steel construction provides durability in damp or wet environments when properly installed. Ensure compatibility with your existing pipe dimensions before installation.
HEIWUKONG 7Inch Clean Out Cover Plate
The HEIWUKONG cleanout cover plate is a round, decorative plate designed to cover access holes for recessed cleanouts and other openings. It features a sturdy design with large screws to secure it firmly and allow easy removal for cleaning the cleanout access hole when needed. Available in stainless steel and white finishes, this 7-inch cover emphasizes corrosion resistance and long service life. Before purchasing, confirm the size and design match for your specific application and décor, as finishes and compatibility vary by installation scenario.
LASCO 03-5600 Clean-Out Cover, 4 1/2-Inch
The LASCO 03-5600 is an ABS white clean-out cover plate, paintable and UPC approved. The 4.5-inch diameter size is common for floor and ceiling cleanout access points in many homes. The ABS construction offers impact resistance and ease of painting to blend with surroundings. Check your hole diameter and mounting style to ensure a snug fit and that the cover does not interfere with attached components or piping.
Raven R1510 PVC Termination Cap Mesh Screen
The Raven R1510 is a termination cap with a stainless steel wire mesh screen designed to vent or terminate PVC pipe ends. Inner and outer diameters measure 4″ and 4.5″ respectively, so verify compatibility with your existing pipe and any adapters required. This product emphasizes water drainage management and wind-driven protection from debris. It is suitable for outdoor venting or roof/ground installations but requires attention to compatibility with your specific piping hub or adapter (not included).
Wuno Shop 7 Inch Cleanout Cover
The Wuno Shop 7-inch cleanout cover is a decorative, round plate designed to cover cleanout plug access holes and other unused openings. It is available with stainless steel or white finishes and includes large securing screws for stability. The product is suitable for ceilings, floors, and walls where a clean, finished look is desired. Its corrosion-resistant stainless steel construction provides durability in various environments, including damp or high-traffic areas. Consider color matching and screw aesthetics to achieve a cohesive installation.
BOPOREAE Expandable Mechanical Seal Cleanout Plug
The BOPOREAE expandable mechanical seal plug is designed for leakproof sealing of cleanout holes and pipe openings. Its rubber expansion mechanism is paired with stainless steel components to resist heat, antifreeze, oil, and rust inhibitors. This plug is intended for 3-9/16″ to 4-5/16″ variations, with a removable Allen wrench handle for easier installation and removal. The design supports low-pressure testing, sealing, and cleanouts across multiple applications, including kitchens, bathrooms, gardens, automotive, construction, and marine environments. Ensure the size matches your hole and consider the need for a wrench or adapters for installation.
Buying Guide: Key Considerations For Cleanout Covers And Caps
- Size compatibility: Confirm the diameter of the cleanout opening and choose a cap or cover that fits snugly to prevent leaks and debris entry.
- Material and finish: ABS, stainless steel, and painted finishes offer varying levels of durability and aesthetics. Stainless steel is often best for high-use or outdoor areas; ABS is common for indoor, paintable options.
- Installation method: Some covers use screws or mounting plates, while others rely on compression or expansion plugs. Consider ease of installation and maintenance access.
- Environment and exposure: Outdoor or damp locations benefit from corrosion-resistant materials; indoor locations may prioritize appearance and ease of painting to match decor.
- Compatibility with accessories: Some products require adapters or additional hardware (not included) to fit certain pipe hubs or elbows. Plan for these needs in advance.
- Intended use: Decorative covers are ideal for visible ceilings or floors, while functional plugs and caps focus on leakproof sealing and cleanout accessibility.
- Maintenance access: If frequent cleanouts are necessary, choose a design that allows quick removal and reinstallation without specialized tools.
These options provide a range of sizes, materials, and styles to fit various cleanout needs. When selecting, verify the exact hole diameter, mounting method, and whether you need a decorative finish or a functional seal for ongoing maintenance access.